Polyacrylamide of drilling fluid

Polyacrylamide 1.Polyacrylamide of water treatment; 2.Polyacrylamide of Oil drilling; 3.Polyacrylamide of Oil production.

Polyacrylamide

Polyacrylamide-PHPAPolyacrylamide for Oil field chemicalsPolyacrylamide for Oil production.

The new type , water medium dispersing type polyacrylamide emulsion ( anionic polyacrylamide) is the most advanced technology .It is developed by Jinyu itselves.

JY FLOC A1920

Most Advanced Technology……….Highly Environmentally Friendly Chemicals

Product Description :water in water Anionic polyacrylamide emulsion

JY FLOC A1920 is an advanced, Macromolecular weight anionic polymer in emulsion form,which does not contain any mineral oil or surfactants. JY FLOC A1920 has negligible toxicity to fish,daphnia,algae,and bacteria.It is quite safe to environment.

Typical Application

JY FLOC A1920 is designed to flocculate suspended solids, and is recommended for the following applications - non-potable raw water clarification, primary and secondary effluent clarification,  municipal wastewater treatment ,various kinds of industrial wastewater treatment ,oil wastewater clarification.

Product Advantages

-Advantages of (W/W) PAM emulsion over solid products: better solubility, higher efficiency, no powder pollution and realization of automatic addition,lower cost;

- Advantages of (W/W) PAM emulsion over (W/O) PAM emulsion: no oil components and surfactants, no secondary pollution to water, lower cost.

Recommended Treatment

Typical dosage rates for JY FLOC A1920 are as follows - As a flocculant for primary clarification, use 1 to 20 ppm. For in-line filtration, use 1 to 5 ppm. For sewage treatment, use 10 to 200 ppm. For oily wastewater clarification, use 1 to 10 ppm. For further technical assistance please contact JINYU.

Handling

Employees should utilize normal precautions when handling chemical products. The use of a face shield or safety goggles, gloves and apron are recommended when handling this product. JY FLOC A1920 is not toxic or corrosive product. If spilled on skin, into eyes or inhaled, emergent washing is a must. Washing with warm water is better.If the emulsion is spilled on the ground, collection of this emulsion is necessary. Collection of the mixture, after addition of dry sand, followed by washing with water, also works. Be very careful of the spilled emulsion because it is very slippery!The product is forbidden to eat! Review the Material Safety Data Sheet (MSDS) for this product prior to use.

Storage

Store in closed containers, at ambient temperatures. Long-term outside storage should be avoided when possible.

Packaging

JY FLOC A1920 is supplied in 250kg plastic drums or 1000kg IBC .

Typical Chemical and Physical Properties

Specific Gravity g/cm³. . . . . . . . . . . . . . . . . . . . . 1.18 - 1.22

Solubility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Soluble in water.

Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Milky white emulsion

Odor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Odorless

Boiling Point, °F . . . . . . . . . . . . . . . . . . . . . . . . . . 180 - 212

pH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 – 7.0

Hydrolysis Degree                           22-26%

© 2002 JINYU Waste Water Treatment ,China. Tel: (86)631-5583632 • Fax: (86)631-5584149

Add:CaoMiaoZi Town,Weihai,Shandong,China

www.jinyupam.cn

It is used in oil production as water shutoff agent ,drilling mud additives in water based drilling system as shale stabilizer, encapsulating agent, and so on .

Now we exported to USA ,Canada,Argentina,Brazil,India,UAE,Australia,Malaysia,Philippines ,etc.

Besides oil field, it is also used as water treatment flocculants in waste water treatment & sludge dewatering agent .

Now we are the biggest emulsion polyacrylamide manufacturer in china .

Thanks for most competitive price and good services, now the PHPA emulsion is popular all over the world .

Polyacrylamide of drilling fluid